echodyne Series 200
A state-of-the-art digital announcement system. The echodyne mainframe was designed and manufactured to exacting telephone standards. This gives the echodyne far superior durability and dependability over our competitions pc based systems. The echodyne is available in 2 models. The echodyne 206 is a Passive Announcement system with loop disconnect capability. The echodyne 242 is an interactive voice response switching system.
echodyne 206
HIGH CAPACITY PASSIVE ANNOUNCEMENT SYSTEM
The echodyne 206 HIGH CAPACITY PASSIVE ANNOUNCEMENT SYSTEM is a state-of-the-art digital announcement system designed and manufactured to exacting telephone standards. The following are the echodyne 206 standard features:
- Direct Telephone line connection to up to 96 ports (24 lines/card)
- 6, 12, and 24 channel line card compatibility
- Detects loop disconnect to free up line ports when caller hangs up prematurely
- Remote control and record telephone line port with password access
- Up to 29 minutes of digital speech storage independent access by every line port
- Small size 17" wide x 13" high x 23" deep in any configuration
- Low power requirements less than 100 watts at 120 Volts AC for a fully equipped system
- Direct printer connection via back panel jack
- Simple speech memory partitioning to guard against accidental over dubbing of messages
- "First Ring Signal" answering of all calls regardless of load on system
- Super simple multi-program capability for service bureau operation
- "String" and "Rotator" message joining capability
- 32 Kbit sampling (Highest in industry) for crystal clear distortion free digital recordings
- "Swapping" feature for off line recording and playback
- Busy hour change over of message without service interruption
- Internal back-up battery for power failures
- Full call count statistics via printer or optional modem
- PC and Mainframe communications via back panel RS-232 port
- Telephone industry standard connectors used throughout
- Meets FCC Part 15 radiation limit rules and is FCC registered
- Optional built-in modem to allow retrieval of call counts via remote terminal or PC
- Optional plug in Time and Temperature announcement system capability
echodyne 242
INTERACTIVE VOICE RESPONSE SWITCHING SYSTEM
The echodyne 242 INTERACTIVE VOICE RESPONSE SWITCHING SYSTEM is a state-of-the-art digital announcement system designed and manufactured to exacting telephone standards. The following are the echodyne 242 standard features:
- Loop Start, Station or Direct T1 connection to up to 240 ports (10 - T1 spans)
- 3 Remote update line ports
- Up to 9 hours of digital speech storage without a hard disc
- Small size - 17" wide x 13" high x 23" deep in any configuration
- Low power requirements - less than 100 watts at 120 Volts AC for a fully equipped system
- Dynamic call allocation - DNIS (DTMF/MF)
- Dynamic speech memory partitioning
- Voice Messaging (recording of callers voice)
- One on one connecting of callers
- Broadcasting to any number of ports
- Internal call transfer to operator (cut through)
- Internal battery back-up for power failures
- Full call count and duration statistics
- Inbound and outbound call capability
- PC and Mainframe communications
- User written program interface that is easy to use Multitasking
- Telephone industry standard connectors used throughout
- Meets FCC Part 15 radiation limit rules and is FCC register
Reveille
Whether you have 50 rooms or 500 rooms. the Reveille automatic wake-up system stands ready to meet the most demanding needs without sacrificing the personal touch. Reveille is a desk-top system designed to wake-up your guests in a very personal way. While your front desk staff and switchboard operator are busy at peak periods with their normal duties, Reveille is quickly, efficiently and accurately making wake-up calls and recording every guest response. Reveille helps you make your staff more time and cost efficient.
"REVEILLE" Automatic Wake-up System
The REVEILLE automatic wake-up system is a totally self-contained desktop unit designed to provide additional feature capability to an existing PBX in a Hotel/Motel or Hospital environment. The following are the Reveille's standard features:
- Each REVEILLE unit holds up to 250 calls and is suitable for properties up to about 350 rooms. Additional unit(s) can be used where greater capacities are needed.
- Simple Keyboard entry of room number and requested wake-up time (in AM/PM format).
- Permanent record of each entry on companion ribbon less printer.
- Multiple wake-up calls per room in any 24-hour period.
- Up to 4 wake-up calls per minute when both of its wake-up lines are installed.
- Automatic load balancing for peak wake-up calling periods. Example: A REVEILLE installed with 2 wake-up lines and 40 calls to make at 6:00 AM will begin making calls at about 5:55 AM and be completed at about 6:05 AM.
- Automatically places a second call for guestrooms that are busy or dont answer.
- Guests that answer are given a pleasant announcement "Hello, This is your automatic wake-up call. Have a nice day." The announcement is self-contained solid state and will not degrade with use.
- The printer registers all calls made with "ANSWER" "NO ANSWER" or "BUSY" indication.
- Second calls that fail to be answered cause an audible alert to sound at the REVEILLE console. A display of the failing room number also appears.
- The current time of day is always available by simply depressing the "TIME" key.
- REVEILLE is totally operational for up to three hours during a commercial power outage due to its built-in battery back-up system.
- If a wake-up line is not functioning, REVEILLE will alert the Hotel by printing "NO DIAL" and the room number that is being called. The audible alert is also sounded during this time to thus not skip an important wake-up call.
- Room numbers and time entries are checked for validity and an audible alert sounds if an entry error occurs.
- Installation and checkout can typically be accomplished in less than one hour with no disruption in existing telephone service.
